Reset the BIOS (clear CMOS)

Put the BIOS back to its factory settings, like after a blank screen.

5 stepsFrom our US support team

Clearing the CMOS puts your PC's BIOS back to its factory settings. It can bring the picture back after a settings change, like turning on Secure Boot.

  1. Unplug the PC
    Shut down, switch the power supply to O (off) and unplug the power cable. Then press and hold the power button for 15 seconds.
  2. Find the coin battery
    Remove the glass side panel and look on the motherboard for a round, coin-sized battery. It's often under the graphics card. Can't reach it? Contact us and we'll show you another way on your motherboard.
  3. Take it out for 5 minutes
    Press the small metal clip beside the battery so it pops up, and leave it out for 5 minutes. Then press it back in, writing side up.
  4. Turn it on
    Put the panel back, plug in the power cable, switch the power supply to I (on) and press the power button. The first start can take a minute or two and may restart a few times. That's normal.
  5. Turn Secure Boot back on if a game needs it
    Clearing the CMOS can switch Secure Boot off again.
    Turn on Secure Boot

Can't reach the battery?

Contact us and a technician will show you another way to reset the BIOS on your motherboard.

Have readyOrder numberA photo of the inside of your PC
Related guideNo picture on my monitor