Gaming PC Benchmarks: How to Read Them Before You Buy

12 min read

Gaming PC beside a benchmark game scene

A gaming PC benchmark is a repeatable test that turns performance into numbers you can compare. The numbers that matter most for play are in-game results at your resolution: average frames per second (FPS), plus the 1% low figure that shows how smooth those frames feel. A single synthetic score tells you much less, so use it only as a starting point. This guide shows how to read each kind of result and how to compare a prebuilt PC under $1,100 against the games you actually play.

Novatech Gaming
Compare PCs Against Your Games
Choose your games and resolution, then explore Novatech’s prebuilt gaming PCs with standard, upgradeable parts.

TL;DR

  • Synthetic benchmarks (such as a 3D score) rank hardware in a controlled test. In-game benchmarks show what you will see in a specific game. Use both, but let the game results decide.
  • Average FPS hides stutter. Look at the 1% low too: a small gap between the two usually means smoother play.
  • Compare results only when the game, version, resolution, graphics settings and upscaling match.
  • At 1440p and 4K the graphics card usually sets the limit. At 1080p with a strong card, the processor matters more.
  • Pick your games and resolution first, then check results for that exact combination.

Table of Contents

What gaming PC benchmarks actually measure

A benchmark runs the same workload on different hardware so the results can be compared. There are three kinds you will meet when shopping.

CPU benchmarks test the processor, the chip that handles game logic, physics, and the instructions sent to the graphics card. GPU benchmarks test the graphics card, which draws the image. Whole-system tests measure how everything works together, including memory and storage.

The second split is between synthetic and in-game tests:

Intel describes the two as complementary: synthetic results give the big picture of a chip’s strengths, and real-world results show day-to-day use. That is a sound way to use them. Synthetic scores help you shortlist; game results help you decide.

Why a high synthetic score can still disappoint

A synthetic GPU test usually measures raw performance, a best-case scenario where drivers and game optimizations play a minimal role. Real games differ. The same tier of graphics card from different makers can behave differently in one title because of drivers, the game engine, or how well the game is tuned for that card.

The processor can also pull the result in another direction. Many game engines lean on a small number of busy threads (a thread is one stream of instructions a processor core works through). A chip with fewer, faster cores can match or beat a many-core chip in games while scoring lower in a multi-core synthetic test. A synthetic number is one input, never the verdict.

Built-in benchmark modes: useful, with limits

Most big games ship with a benchmark mode, and it is a good, free way to compare two results. It is also a simplified scene. Digital Foundry has pointed out that built-in modes often do not reflect real-world performance and tend to treat the GPU as the only limit. In actual play, the processor and storage are often behind the stutters you notice, with simulation, animation, AI and draw calls (the instructions telling the graphics card what to render) causing big dips.

Practical takeaway: treat a built-in benchmark as a fair way to compare two machines on the same scene, and treat any custom or recorded gameplay run as a closer picture of the moments that cause hitches, such as a crowded city or a big fight.

Built-in benchmark modes: useful, with limits

How to read FPS, 1% lows and frame time

FPS counts how many frames the PC draws each second. Higher usually means smoother motion. But the average alone can mislead, so most careful reviews also report the 1% low.

Average FPS

The average is the total frames divided by the time of the run. It is a fine headline, but two machines with the same average can feel very different. One source on benchmark reading puts it bluntly: going from 200 to 210 average FPS changes nothing you can feel, while a jump in the 1% low from 90 to 140 changes everything.

1% lows and 0.1% lows

These describe the slowest frames in a run. Intel explains that FPS counts frames per second, while frame time counts the milliseconds between frames, and ideally that spacing is consistent. If it is not, pacing is uneven and you see stutter.

How frame time and low-percentile FPS relate

A useful rule from a CapFrameX benchmarking guide: a 1% low that sits close to the average usually means a smoother, more consistent experience. The 0.1% low is the floor you rarely drop under, the point most likely to cause a perceptible hitch.

Here is an illustration with made-up numbers, only to show the logic:

PC A PC B
Average FPS 120 105
1% low FPS 65 88

PC A wins the headline, but its worst moments dip far below its average, so it may feel more uneven. PC B gives up some average speed for steadier pacing. For most players, PC B is the better experience.

One warning when you compare reviews: not every site calculates “1% low” the same way. There are different methods in use, so only compare 1% low numbers from the same source, using the same method.

Resolution, CPU and GPU: where the limit really is

A bottleneck is the part that holds the others back. In games it is usually either the graphics card (GPU-bound) or the processor (CPU-bound), and which one it is depends on your settings.

  • At 1440p or 4K with demanding settings, the graphics card is often the limit, and different processors produce similar frame rates.
  • At 1080p with a powerful graphics card, the processor is more likely to matter.

XDA Developers makes the same point: lower resolutions like 1080p best show the differences between CPUs, because as resolution climbs the load shifts to the GPU. TechSpot adds that resolution only matters for CPU testing to the extent it makes the GPU the main bottleneck, since the CPU itself does not care how many pixels are drawn.

Upscaling changes the math

Most modern players turn on upscaling (DLSS or FSR), which renders the game at a lower resolution and sharpens it to your screen size. TechSpot notes that at 1440p with Quality upscaling the base render resolution is 960p, below 1080p. In its test, a Ryzen 7 9800X3D was 33% faster than a 5800X3D at 1080p and 27% faster at native 1440p, but 36% faster at 1440p with Quality upscaling. So if you play with upscaling on, a CPU result at 1080p is more relevant to you than you might expect.

A note on bottleneck calculators

Online bottleneck calculators ask for your CPU and GPU and return a percentage. Engadget explains they compare the two parts at a target resolution, and a score around ten percent or less means a good match. It also notes they rely on spec sheets and theory, not real data from your PC, so details like a processor’s cache size are lost. Treat the number as a rough hint and rely on in-game results for the games you care about.

The same logic applies when you size up the rest of a setup. A benchmark tells you about performance, while other numbers, like how much power a display draws, come from measuring at the wall, as this guide to monitor power usage shows.

How to compare two benchmark results fairly

A comparison is only meaningful if the conditions match. Before you set two results side by side, check that both used the same:

  1. Game and version. Patches and driver updates change performance.
  2. Scene or workload. A quiet corridor and a busy market are different tests.
  3. Resolution. 1080p, 1440p and 4K results are not interchangeable.
  4. Graphics preset. “High” and “Ultra” can differ by a wide margin.
  5. Upscaling and ray tracing settings. On, off, and the quality level all change the result.
  6. Power profile and background apps. The testing guidance is to use the same application version, workload, BIOS settings, power profile, resolution and graphics settings, and close apps that could use CPU, GPU, memory or storage.

Also look at how many games a review tested. XDA Developers explains that outlets use a mix of genres because most games lean heavily toward being either GPU-bound or CPU-bound, and a lopsided test list produces a half-baked conclusion. A result from one game tells you about that game.

Using benchmarks to shop for a gaming PC under $1,100

At this budget, the goal is not the highest chart position. It is a PC that runs your games at a frame rate you enjoy, at a resolution your screen supports. Here is a simple routine.

Step 1: Write down your games and your screen

List the three to five games you play most and your monitor’s resolution and refresh rate (how many times per second it redraws, such as 60 Hz or 144 Hz). A fast esports shooter at 1080p and a graphics-heavy single-player game at 1440p ask for different hardware.

Step 2: Choose a target

Decide what feels good to you. Many players aim for a steady 60 FPS in big single-player games and higher in competitive ones, ideally near your monitor’s refresh rate. There is no universal number: your target is the one you can see and feel.

Step 3: Find in-game results for the graphics card

At this price, the graphics card does most of the work at 1080p and above. Search for results of the exact card in your games, at your resolution and preset. Use the average for the headline and the 1% low for smoothness. Check two or three independent sources and compare only those with matching settings.

Step 4: Check the processor and memory

If you play at 1080p or competitive titles at high frame rates, the processor matters more. Make sure the system has enough memory for the games and the apps you run alongside them, such as a browser, voice chat, or streaming software.

Step 5: Match the PC to your game list

Instead of reading dozens of charts, run your game list through a tool built for it. The Novatech PC Finder is designed to show which gaming PC runs the games you choose, so you can narrow the options before you read any further benchmarks.

Step 6: Plan for upgrades

A balanced machine with standard parts lets you improve the weakest link later. If benchmarks show the graphics card is the limit in your games, a better card is the natural upgrade. A prebuilt that uses standard components keeps that option open.

When your PC runs slower than the charts suggest

Sometimes a PC scores well and still feels slow in a game. Common causes are background apps, outdated graphics drivers, a power plan set to saving mode, or settings pushed higher than the hardware likes. Novatech’s help guide on games that run slower than expected walks through the checks in order. Run the same benchmark scene before and after each change so you know which one helped.

Where Novatech fits

Novatech Gaming is a Wilmington, Delaware company that hand-builds prebuilt gaming PCs, assembled and stress-tested in the USA. Gaming PCs start at $649.99, with graphics cards from the RX 580 to the RTX 5060. Every system ships with Windows 11 Pro and no bloatware, and uses standard, upgradeable parts, which fits the upgrade-the-weakest-link approach above. These PCs ship without a monitor, keyboard or mouse.

In-stock gaming PCs ship in 1 business day, shipping is free in the contiguous US, and there are 30-day returns and 30-day price protection. Gaming PCs carry a 1-year parts and labor warranty that can be extended up to 3 years, and customers get lifetime tech support from a US team. Prices and stock change often, so check the Gaming PCs collection for current pricing.

Phantom

If you already know your games, start with the PC Finder, then open the collection to see the models that match. If you want to talk it through, chat with us 10 AM to 11 PM ET, 7 days a week, or email us at support@novatechgaming.com.

FAQ

What is a good benchmark score for a gaming PC?

There is no single good score, because it depends on the game, resolution and settings. A better target is a frame rate you enjoy, such as a steady 60 FPS or one near your monitor’s refresh rate, with a 1% low close to the average. Pick that target first, then check results for your own games.

Are synthetic benchmarks or in-game benchmarks better?

In-game benchmarks are better for judging how a PC will play your games. Synthetic tests are good for comparing parts in a controlled way and for building a shortlist. Using both gives the full picture, as Intel’s guidance on synthetic and real-world benchmarks suggests.

What does 1% low mean in gaming benchmarks?

It describes the slowest frames in a test run, which is where stutter shows up. A 1% low close to the average FPS usually means smoother play. Sites calculate it in different ways, so compare 1% lows only from the same source.

Does resolution change which part matters?

Yes. At 1440p and 4K the graphics card is usually the limit. At 1080p with a strong card, the processor matters more. Upscaling lowers the internal resolution, which can make the processor matter more than the screen resolution suggests.

How can I check which games a gaming PC will run?

Use a tool that matches PCs to games, such as the PC Finder, then confirm with in-game results at your resolution and settings.

Novatech Gaming
Questions About Gaming PC Benchmarks?
Email Novatech’s support team with questions about choosing a prebuilt gaming PC for the games and resolution you play.

Sources

Keep reading

All posts

Game finder

Not sure which PC? Find it in 3 taps.

  1. Your game
  2. Your screen
  3. Your FPS