GPU Not Detected on PC? How to Find the Cause and Fix It
If your PC does not detect your graphics card, the cause is almost always one of five things: a loose power cable or poorly seated card, a monitor plugged into the wrong port, a missing or generic driver, a BIOS setting, or (least often) a card that has failed. Work through them in that order, because the first three take minutes and fix most cases. If the card shows up in Windows but your AI software does not use it, skip ahead to the AI section, since that is a software install problem, not a hardware one.
A quick definition first. The GPU (graphics processing unit) is the chip on your graphics card that draws game images and runs AI math. “Not detected” can mean three different things: no picture at all, a picture but Windows does not list the card, or Windows lists it but a game or AI tool ignores it. The right fix depends on which one you have, so the first step is finding out.
TL;DR
- No picture after installing a card: plug the monitor cable into the graphics card, not the motherboard, then reseat the card and check every power connector.
- Picture works but the card is missing or shows as “Microsoft Basic Display Adapter”: install the driver from the card maker (NVIDIA, AMD or Intel).
- Still nothing: check the BIOS, try another PCIe slot, cable and monitor, and test the card in another PC if you can.
- AI tools that ignore your GPU usually have a CPU-only build of the framework installed. Reinstall a CUDA build.
- Chat with support or contact the card maker about a warranty claim if the card fails in a second PC.
Table of Contents
- First, find out what Windows actually sees
- New graphics card and no display: the checklist
- Windows sees a generic adapter: install the driver
- Check the BIOS or UEFI settings
- Card listed, but a game uses the wrong GPU
- AI model says no GPU found, but Windows sees the card
- Is the card dead? Separating a software fault from a hardware one
- Quick reference: what to try, in order
- If you would rather have this handled for you
- FAQ
- Sources
First, find out what Windows actually sees
Before opening the case, check what Windows reports. There are a few quick ways.
- Task Manager. Press Ctrl+Shift+Esc, open the Performance tab and look for a GPU entry. Microsoft’s guide to checking your GPU says the GPU name and usage appear in the top-right corner of that panel. The same page points to Settings > System > Display > Advanced display, where the make and model appear under Display information.
- Device Manager. Right-click Start, open Device Manager and expand Display adapters. Microsoft’s Device Manager documentation explains that a problem device is flagged with a yellow exclamation point and an error message, and that some devices are hidden by default until you turn on the option to show hidden devices. Open the device’s Properties and read the General and Driver tabs for the error.
- System Information. Press Win+R, type msinfo32 and check Components > Display. MakeUseOf’s walkthrough notes that if the card is listed but disabled, you can re-enable it in Device Manager.
What you see tells you where to go next:
| What you see | What it usually means | Go to |
|---|---|---|
| No picture at all | Cable in wrong port, power, seating | The no-display checklist |
| “Microsoft Basic Display Adapter” | Windows is using a generic driver | The driver section |
| Card missing from Device Manager | Seating, power, slot, BIOS or a failed card | Hardware and BIOS sections |
| Card listed, games or AI tools ignore it | Wrong GPU selected, or CPU-only AI build | Game and AI sections |
New graphics card and no display: the checklist
A new card with a black screen is the most common version of this problem, and it is usually a simple fix. Turn the PC off, unplug it from the wall and go through these in order.
1. Move the monitor cable to the graphics card
This catches more people than any other step. Your motherboard has video ports too, and if the monitor is plugged into those, the PC uses the processor’s built-in graphics and ignores your new card. ZOTAC’s no-image guide lists connecting the HDMI or DisplayPort cable to the GPU rather than the motherboard among its first checks. If your monitor and the card use different connectors, an adapter may be needed. Check that the monitor itself is powered and set to the right input.
2. Check every power connection
Modern cards often need one or more extra power cables from the power supply, on top of the slot itself. ZOTAC’s guide tells you to confirm the PC and GPU power cords are plugged in and that the power supply is strong enough for the card. Look up your card maker’s minimum power supply rating on its product page and compare it with the label on your power supply. Push each connector in until it clicks fully, because a half-inserted plug can look fine and still fail. Do not leave a connector on the card empty.

If the PC itself shows signs of power trouble, such as random shutdowns or restarts, read our guide to the signs of power supply failure. If it will not turn on at all, start with My PC won’t turn on.
3. Reseat the card
For a newly installed card with no video, iFixit’s video card troubleshooting page says the usual cause is a card that is not fully seated. Remove the card, check the gold contacts (the “fingers”) for dirt, and push it into the top x16 slot until the latch clicks. ZOTAC also advises making sure those contacts are clear of dirt and foreign objects. Then check the card’s rear bracket is screwed in so the card cannot tilt.
4. Swap the cable and monitor
A bad cable or an input the monitor is not using looks exactly like a dead card. PNY’s FAQ suggests testing with another display cable or monitor and, for stubborn cases, trying a different PCIe slot if your motherboard has more than one. If you have a spare cable, this takes one minute.
5. Use the built-in help
If you own a Novatech PC, our No picture on my monitor guide covers the same ground with the cases we see most.
Windows sees a generic adapter: install the driver
A driver is the software that lets Windows talk to a piece of hardware. If Device Manager or the DirectX Diagnostic Tool (type dxdiag, then open the Display tab) shows “Microsoft Basic Display Adapter”, Microsoft explains that Windows is using its generic driver instead of the manufacturer’s, and recommends updating to the manufacturer-specific driver. In practice, the generic driver gives you a picture but poor performance and no control panel.
Here is the routine:
- Note your card’s exact name from the box, the card label or Device Manager.
- Download the current driver from the card maker’s own website (NVIDIA for GeForce, AMD for Radeon, Intel for Arc and Intel integrated graphics).
- Run the installer, choose a clean or custom install if offered, and restart.
- Recheck Task Manager > Performance for the GPU entry.
If you cannot get a picture long enough to do this, iFixit suggests booting into Safe Mode, which loads basic Windows display drivers so you can test the adapter and display and then install the proper driver. Our Windows updates and drivers page explains how updates interact with graphics drivers.
If the screen goes blue or the PC restarts during installation, see Blue screen or crashes. For games that launch and then close, Games Crashing on PC walks through the causes.
Check the BIOS or UEFI settings
The BIOS (or UEFI, its modern form) is the settings screen you reach by pressing a key such as Delete or F2 as the PC starts. The exact menu names vary by motherboard brand, so use your motherboard manual for specifics.
- Integrated graphics. Intel’s support article says that if an Intel adapter still does not appear after installing the driver, integrated graphics may be disabled in the BIOS and should be enabled there. On hybrid-graphics systems, it recommends enabling hybrid mode and then doing a clean driver install.
- PCIe settings. Newer cards sometimes work best with the board set to UEFI boot rather than legacy compatibility mode, and with options such as Above 4G Decoding and Re-Size BAR turned on. Look for them in the boot and PCIe sections of your motherboard’s menu.
- Primary display. Some boards have a setting for which graphics source starts first. If it is set to the integrated option, switch it to the PCIe slot.
Change one setting at a time and write down what you changed, so you can undo it. If you are unsure, load the BIOS defaults first and retest.
Card listed, but a game uses the wrong GPU
If you have both integrated graphics and a graphics card, Windows can run a game on the weaker one. Open Settings > System > Display > Graphics, add the game and set it to high performance, which tells Windows to use the discrete card. Also confirm your monitor is on the card’s port, as above. To see whether your card suits a specific game in the first place, our PC Finder shows which gaming PCs run the games you play.
AI model says no GPU found, but Windows sees the card
This one catches AI and machine learning users more than gamers, and it is a software problem. If Task Manager and the nvidia-smi command both show your card, the hardware is fine.
The most common cause with PyTorch is that the CPU-only build was installed. A PyTorch forum answer explains that a version string ending in “+cpu” with GPU support reported as False means you have the CPU-only binary, even if nvidia-smi shows CUDA. CUDA is NVIDIA’s toolkit for running computation on its GPUs. The fix is to install a CUDA build from PyTorch’s own index, with a command in the form pip3 install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu128. The same thread notes that PyTorch ships with its own CUDA runtime, so the toolkit version you installed separately is not what PyTorch uses.
A short checklist for AI software:
- Run nvidia-smi in a terminal. If it fails, you have a driver problem, so go back to the driver section.
- In Python, print torch.version.cuda. If it returns None, the library was built without CUDA support, and you need to reinstall from a CUDA wheel index.
- Uninstall the old packages first (pip uninstall torch torchvision), then install the matching build, so two versions do not conflict.
- Check the CUDA_VISIBLE_DEVICES environment variable. Aspose’s GPU troubleshooting documentation says to unset it if it is empty or -1, because that hides every GPU from the program. The same page says some software silently falls back to the CPU if its downloaded binary is a CPU variant or its GPU layers setting is 0.
- On Windows with an AMD card, check what your framework supports. Aspose notes that Vulkan is the only GPU path in its software on Windows with AMD, since no HIP builds ship for Windows. Microsoft also documents PyTorch with DirectML as a public-preview route for DirectX 12 GPUs on Windows, which you install with pip install torch-directml in a conda environment.
For on-premises AI work, also check that the card is in a slot with enough power and that the driver is the current one from the card maker. A multi-GPU machine adds one more case: if one card is missing from the list, reseat that card and its power cables before changing any software.
Is the card dead? Separating a software fault from a hardware one
If the card fails every check above, test it in another PC, and test a different card (or the integrated graphics) in yours. The result tells you which part is faulty:
- Card fails in a second PC too: the card is the problem. Contact the card maker or seller about a warranty claim, since many have a return process for cards with no output.
- Card works in the second PC but not yours: suspect your slot, power supply, BIOS setting or motherboard.
- Nothing displays even from integrated graphics: look at the monitor, cable, RAM and motherboard. A PC that does not boot properly can also point to memory, so see PC Not Detecting RAM.
Signs a card is failing include artifacts (colored dots or stripes), crashes under load, fans that spin at full speed with no picture, and the card dropping out of Device Manager at random. Laptops are a different case, because the graphics chip is soldered to the board. If you see these symptoms on a laptop, the laptop motherboard failure symptoms are worth reading before you assume a driver fix will work.
Do not keep forcing a card that shows these signs. Repeated hard resets on a card that may have a bad power connector can make a problem worse.
Quick reference: what to try, in order
- Check the monitor cable is in the graphics card, and test another cable or monitor.
- Reseat the card and every power connector.
- Confirm what Windows sees in Task Manager, Device Manager and dxdiag.
- Install the driver from the card maker.
- Check BIOS settings one at a time.
- For AI tools, reinstall a CUDA build and check environment variables.
- Test the card and a known-good card in another PC to isolate the fault.
If you would rather have this handled for you
Novatech Gaming, based in Wilmington, Delaware, builds prebuilt gaming PCs, workstations and GPU servers. Our systems are assembled and stress-tested in the USA, ship with Windows 11 Pro and no bloatware, and use new, standard, upgradeable parts, so the card, power and drivers are set up before the PC reaches you. In-stock gaming PCs ship in 1 business day, and shipping is free in the contiguous US. Gaming PCs start at $649, and gaming PCs ship without a monitor, keyboard or mouse. Workstations for AI, video editing and streaming start at $2,899, are built to order, get a 48-hour burn-in and ship in 5 to 10 business days. Prices and stock change often, so check the collection pages for current pricing.
Gaming PCs carry a 1-year parts and labor warranty, extendable up to 3 years, and workstations and servers have a 3-year limited warranty. If you upgrade a Novatech PC, the parts it shipped with stay covered, parts you add yourself are not covered, and coverage claims are judged case by case. Not sure which GPU runs the model you have in mind? Try our AI Model Finder.
If your Novatech PC has a problem, we offer lifetime tech support from a US team. Reach us on our support page, chat with us live from 10 AM to 11 PM ET, 7 days a week, or email us at support@novatechgaming.com. If Windows will not start on a Novatech PC, support mails you a USB repair drive.

FAQ
Why is my GPU not showing in Device Manager?
The most common reasons are a card that is not fully seated, a missing power cable, a disabled device or a BIOS setting. Turn on the option to show hidden devices in Device Manager, since some devices are hidden by default. If the card is still missing, power off, reseat it and recheck every power connector.
Why does my new graphics card give no display?
Check first that the monitor cable is plugged into the graphics card, not the motherboard. Then confirm the card is fully seated and that all of its power cables are connected. Try a different cable or monitor to rule those out.
What does Microsoft Basic Display Adapter mean?
It means Windows is using its generic display driver instead of the one from your card’s maker. You get a picture, but not full performance. Download the current driver from NVIDIA, AMD or Intel, install it and restart.
Why does my AI software not detect my GPU when Windows does?
Usually the CPU-only version of the framework is installed. For PyTorch, a version ending in “+cpu” is the sign. Uninstall it and reinstall a CUDA build from PyTorch’s official index, then check that nvidia-smi works.
How can I tell if my GPU is dead?
Test it in another PC. If it shows no output or is not detected there either, after reseating and checking power, the card is the likely fault. Contact the card maker or seller about a warranty claim.
Sources
- How to Check Your GPU and Why It Matters, Microsoft Windows
- Using Device Manager, Microsoft Learn
- Graphics Card Not Detected by Windows? 7 Ways to Fix It, MakeUseOf
- No image is displayed after turning on my PC, ZOTAC
- Video Card Troubleshooting, iFixit
- Microsoft basic display adapter in Windows, Microsoft Support
- Intel Graphics Adapter Doesn’t Appear in the Device Manager, Intel
- How to use torch with CUDA 12.9, PyTorch Forums
- GPU not detected, Aspose Documentation
- Enable PyTorch with DirectML on Windows, Microsoft Learn

