PC Restarts While Gaming: Causes and Step-by-Step Fixes

12 min read

Gaming PC beside a dark monitor after restart

A PC that restarts mid-game is almost always reacting to something specific: heat, not enough clean power, unstable memory or overclock settings, or a bad graphics driver. A restart with no blue screen and no warning usually means the hardware cut power or reset itself to protect the system. The fastest way to find the cause is to change one thing at a time, in the order below, and write down what happens. That is how we would walk a friend through it at Novatech Gaming, and it needs no special tools.

Novatech Gaming
Find a Gaming PC Built to Last

Explore hand-built gaming PCs with new, standard upgradeable parts, assembled and stress-tested in the USA.
Shop gaming PCs

TL;DR

  • Restarts under load (games, not desktop use) point to heat, the power supply, or unstable memory or overclock settings far more often than to Windows itself.
  • Start with the free checks: note when it happens, watch temperatures, reset the BIOS to defaults and turn off any overclock or memory profile.
  • If the restarts began after a driver update, roll back or cleanly reinstall the graphics driver.
  • Test with the bare minimum of parts, and replace the part that fails. A power supply that cannot hold up under a heavy load is a common culprit.
  • If you have a Novatech PC and the steps do not fix it, contact our US support team. Live chat runs 10 AM to 11 PM ET, 7 days a week.

Table of Contents

Why gaming triggers restarts and the desktop does not

Browsing the web asks very little of your PC. A game asks for the most your processor, graphics card and memory can deliver, all at once, for hours. That pushes three things up together: heat, power draw and memory activity. A weak spot in any of them shows up first in a game.

Gaming load stresses heat, power and memory

AMD’s stability guide lists random reboots, crashes, freezes and blue screens as symptoms that can have one or several causes. Its list of possible causes includes outdated or misconfigured BIOS settings, unsupported memory configurations, unstable overclocking, overheating, outdated or corrupted drivers, conflicting software and faulty hardware. So no single “fix” works for everyone. The job is to narrow it down.

(The BIOS is the small program on your motherboard that runs before Windows starts. It holds the hardware settings, including fan speeds, memory speed and overclocks.)

Step 1: Write down what happens before you touch anything

AMD’s advice is to record when the symptoms occur and whether they started after a change to software, drivers, firmware, BIOS, hardware or peripherals, before you start taking things apart. Ten minutes of notes saves hours.

Answer these:

  • Does it restart in every game or just one? One game points to that game or its settings. Every demanding game points to hardware.
  • How long into a session? Restarts after 20 to 40 minutes often mean heat building up. Restarts in the first minute, or when a new scene loads, often mean a power or memory problem.
  • Did anything change recently? A new driver, a Windows update, a new part, a new game, a BIOS update, or an overclock.
  • Does the screen freeze or go black first, or does the PC just cut out and boot again? An instant cut usually means power or heat protection. A freeze followed by a restart leans toward drivers or memory.

Keep that list open. It decides which of the next steps you start with.

Step 2: Check for overheating

Heat is the most common cause, and the easiest to test. Intel’s guidance on gaming reboots tells you to check that components are running at normal operating temperatures, and warns that overheating can trigger a shutdown.

How to watch temperatures

Install a free monitoring tool that shows CPU and GPU temperature, then start a game and watch the numbers as the session goes on. If the temperature climbs steadily and the PC restarts when it peaks, you have your answer. If temperatures stay moderate right up to the restart, move on to power and memory.

As a rough guide, a CPU or GPU sitting in the 80s °C under load is common, while one touching the upper 90s and beyond is a problem. Exact limits differ by chip, so check the maker’s spec page for your processor and graphics card.

A related behavior is thermal throttling, where a processor slows itself down to cut heat. Throttling means the cooling is struggling but the PC is still protecting itself. A restart means it ran out of that protection.

Where the heat usually hides

Power the PC off and unplug it before touching anything inside. Then look for:

  • Dust packed into the fins of the CPU cooler, the graphics card fans and the front intake filter.
  • A fan that does not spin, or spins only at the start. Watch them when you launch a game.
  • Cables or a case panel blocking airflow, or a case pushed against a wall or sitting on carpet.
  • A CPU cooler that has worked loose. If the processor spikes into the 90s within seconds of launching a game, the cooler may not be touching the chip properly.

The same dust-and-airflow logic applies to any small gaming device, and this guide to handheld overheating fixes shows how heat builds up in a closed case. In a desktop, a can of compressed air used in short bursts, with the fans held still so they do not over-spin, handles most of the problem.

Step 3: Rule out the power supply

The power supply unit (PSU) is the box that converts wall power into the steady voltages your parts need. When you launch a game, the graphics card can demand a sudden surge of power. If the PSU is too small, aging, or failing, voltage dips and the PC resets, usually without any warning.

Intel’s random-reboot guide tells you to confirm the PSU has enough wattage for the whole platform under heavy load. Check these in order:

  1. Compare wattage to your parts. Look at the recommended PSU wattage on your graphics card’s spec page. If you upgraded the graphics card without upgrading the PSU, this is the first thing to check.
  2. Check the cables. Intel’s guidance for reboots after a graphics driver change includes securing the GPU power cables. Push each connector in until it clicks, and make sure every power plug on the graphics card is used.
  3. Look for the pattern. Restarts that hit at the moment of heavy load, with temperatures still normal, fit a power problem. A burning smell, a buzzing or clicking PSU, or random restarts even at the desktop are reasons to stop using the PC.
  4. Swap if you can. The cleanest test of a PSU is replacing it with a known-good unit of adequate wattage.

We cover the warning signs in more detail in our guide to the signs of power supply failure, including when to shut the PC down for good. If the PC will not power on at all, our Help Center guide My PC won’t turn on covers it.

Step 4: Reset the BIOS and turn off overclocking

Many restarts come from settings, not broken parts. An overclock is any setting that runs a part faster than its default speed, and some motherboards enable them automatically through features like memory profiles (XMP on Intel boards, EXPO on AMD boards) or automatic CPU boost tuning.

Intel’s random-reboot guide recommends loading default BIOS settings while you isolate hardware problems, and its driver-related guide adds disabling overclocking and restoring BIOS defaults. Do that first, then play. If the restarts stop, add your settings back one at a time until they return.

Tom’s Hardware makes a point worth remembering: an unstable memory profile can look exactly like faulty RAM, so return memory to its stock speed before testing it. Many “bad RAM” diagnoses disappear once the profile is switched off.

To reset the BIOS, follow our Help Center guide to reset the BIOS (clear CMOS). It walks through the steps for a desktop.

Step 5: Fix the graphics driver

A graphics driver is the software that lets Windows and your games talk to the graphics card. If restarts began after a driver update, the new driver is the first suspect.

  • Roll back. In Device Manager, open the graphics card’s properties, go to the Driver tab and choose Roll Back Driver if the button is available.
  • Do a clean reinstall. Intel recommends removing the current driver in Safe Mode with Display Driver Uninstaller and then installing the latest graphics driver when reboots began after an update. Safe Mode is a stripped-down Windows startup, which lets the old driver be removed completely.
  • Update if it is old. Intel’s gaming-reboot article says to check the driver and update it if it is out of date. This holds for any graphics brand: download from the chip maker, not from a third-party site.

Our Help Center page on Windows updates and drivers explains how to keep drivers current without letting Windows swap in an older one. If your PC shows a blue screen before restarting, the blue screen or crashes guide helps you read the stop code. A broader checklist for game-specific problems is in Games Crashing on PC.

Step 6: Test your memory

Unstable memory (RAM) can cause restarts, freezes and blue screens, often in the middle of a game when a lot of data moves quickly. After you have returned it to stock speed (Step 4), test it:

  • Intel recommends testing memory with Windows Memory Diagnostic or MemTest86. Windows Memory Diagnostic is built in. MemTest86 runs from a USB stick and is more thorough. Let it run several full passes.
  • If you have two or more sticks, test them one at a time in the first slot your motherboard manual recommends.
  • Reseat each stick by pressing it firmly into its slot until both clips click.

If one stick shows errors, Tom’s Hardware notes the only fix for a faulty memory module is replacing it, usually through the manufacturer’s RMA (a return and replacement process). If the PC does not recognize your RAM at all, see PC Not Detecting RAM. How much memory you need for modern games is covered in How Much RAM Should a Gaming PC Have.

Step 7: Strip the PC down to the essentials

If nothing so far has fixed it, isolate the faulty part. Intel’s gaming-reboot guide says to test with only the essential components: motherboard, processor, one memory stick, graphics card, one storage drive and the PSU, and to reseat the graphics card and RAM first.

A practical routine:

  1. Shut down, unplug and touch the metal case to discharge static.
  2. Remove extras: additional drives, capture cards, extra RAM sticks, USB add-in cards.
  3. Reseat the graphics card in the top PCIe slot, directly on the motherboard rather than on a riser cable. Intel also lists connecting the card directly to the motherboard slot among its steps.
  4. Play the game that restarted before. If it is stable, add parts back one at a time, running a game after each.

The part that brings the restarts back is the one to replace or investigate.

What the Windows event log can and cannot tell you

When Windows restarts abruptly, it logs a “Kernel-Power” event with ID 41 in Event Viewer. It confirms the PC shut down without a clean exit, which you already know. It does not name the guilty part. Treat it as a timestamp: check what you were doing then, and what the temperature and load were.

One exception is software. If Windows will not start after repeated restarts, a system repair is needed rather than part swaps.

When to stop and ask for help

Stop troubleshooting and get support if:

  • The restarts continue after you have reset the BIOS, cleaned the PC, reinstalled the driver and tested with minimal parts.
  • You smell burning, see swollen components, or hear the PSU buzzing or clicking.
  • You are not comfortable opening the case or handling power cables.
  • A memory test reports errors, or a part fails in a way you cannot fix with settings.

If you own a Novatech PC, email us at support@novatechgaming.com or chat with us. Our support page has the details. You get lifetime tech support from a US team, and live chat is open 10 AM to 11 PM ET, 7 days a week. Tell us your notes from Step 1, what you have already tried and what the temperatures look like. If Windows will not start at all, our support team mails you a USB repair drive.

A PC built to be easy to diagnose

A restart you cannot trace is far less stressful on a PC with standard, replaceable parts and a support team that knows how it was put together. Every Novatech PC is hand-built in Delaware, assembled and stress-tested in the USA, and ships with Windows 11 Pro and no bloatware. It uses new, standard, upgradeable parts, never refurbished, so a faulty stick of RAM or an undersized PSU can be swapped for a regular replacement.

Our gaming PCs start at $649, ship in 1 business day when in stock, and come with a 1-year parts and labor warranty that can be extended up to 3 years, plus 30-day returns. They ship without a monitor, keyboard or mouse. For current prices and stock, see the Gaming PCs collection, and use the PC Finder to check which games a given system runs.

Novatech Gaming

If you work with AI models, video editing, rendering or streaming, our workstations start at $1,499, are built to order with a 48-hour burn-in, and carry a 3-year limited warranty. See the workstations and servers page.

Once your PC is stable, How to Optimize Your PC for Gaming helps you keep it that way.

A PC built to be easy to diagnose

FAQ

Can a bad power supply make my PC restart while gaming?

Yes. A PSU that cannot supply enough steady power when the graphics card ramps up can cause the PC to reset with no warning. Check that its wattage meets your graphics card’s recommendation, make sure every power cable is fully seated, and consider swapping in a known-good PSU as a test.

Can bad RAM cause my PC to restart?

It can, but first make sure your memory is running at its stock speed. An unstable XMP or EXPO profile can look like faulty RAM. If errors still appear in Windows Memory Diagnostic or MemTest86 at stock speed, replace the faulty stick.

Does my PC restart because it is overheating?

Possibly. Watch your CPU and GPU temperatures during a game. If they climb steadily and the PC restarts at the peak, clean the dust out, confirm every fan spins and check that the CPU cooler is seated firmly. If temperatures stay normal, look at the power supply and memory next.

Should I update or roll back my graphics driver?

If the restarts started right after a driver update, roll back to the previous version or do a clean reinstall. If your driver is quite old, updating directly from the chip maker’s site is the usual fix.

NNovatech Gaming
Questions About Your Gaming PC?
Email our US support team with questions about troubleshooting a Novatech PC or choosing a system with upgradeable parts.

Sources

Keep reading

All posts

Game finder

Not sure which PC? Find it in 3 taps.

  1. Your game
  2. Your screen
  3. Your FPS